Extruded Aluminum Tube

Porthole & Seamless

Alfiniti extrudes aluminum tube and pipe on its own 9″ diameter, 3,300 MT press in nine alloys, up to a 6.00″ circle size and 33 ft long. Parts that need tighter tolerances get cold drawn, then cut, formed, machined and finished to your print.

Pour toute question, communiquez avec nous

Extruded Aluminum Tube Overview

Alfiniti extrudes aluminum tube and pipe to ASTM B221, B308, B317 and B429. We run 1050, 1060, 1100, 3003, 6005, 6061, 6063, 6082 and 6463 in O and T tempers, from 0.085 to 4.75 lb/ft. Order tube as extruded, send it to our draw benches for tighter dimensions, or have it fabricated and finished before it ships.

Request a Quote

Extruded Aluminum Tube Specifications

Extrusion Capabilities

Other alloys, thinner walls and custom alloy and temper combinations are available on inquiry.

ParameterCapability
Extrusion pressOne 9″ diameter, 3,300 MT press
Max circle size6.00″
Weight per foot0.085 to 4.75 lb/ft
Max length33 ft
Temper familiesO (annealed), T (solution heat treated)
SpécificationsASTM B221 (profiles), B308 (structural), B317 (electrical), B429 (structural pipe and tube)

Alloys and Minimum Wall

Minimum wall depends on OD.

AlliageMinimum Wall
10500.050″
10600.050″
11000.050″
30030.050″
60050.065″
60610.065″
60630.050″
60820.065″
64630.050″

Chemical and tensile limits: ASTM B221, ASTM B241 seamless tube and pipe et la AMS 4173 for 6061-T6511 extrusions.

Standard Extruded Round Tube Sizes

Inches and pounds per foot. Not all sizes are available in all alloys and tempers. For an unlisted size, send us your OD and wall.

OD (in.)Wall (in.)Weight (lb/ft)
0.2500.0300.025
0.3130.0300.032
0.3750.0300.039
0.4380.0300.047
0.5000.0500.083
0.6250.1250.236
0.6870.0470.113
0.7500.0490.129
0.7500.0620.161
0.7500.0720.185
0.7500.0830.209
0.7500.1200.286
0.8750.0620.190
1.0000.0490.175
1.0000.0620.218
1.0000.0800.277
1.0000.1000.338
1.0500.1130.400
1.0500.1400.480
1.0980.0800.307
1.1250.0570.229
1.1250.0800.316
1.1400.0570.233
1.2500.0550.247
1.2500.0650.290
1.2500.0850.373
1.2500.1000.433
1.2500.1750.709
1.3120.1330.593
1.3120.1400.620
1.3150.1090.496
1.3750.0800.391
1.3750.0850.414
1.3750.1000.481
1.3750.1250.589
1.5000.0650.352
1.5000.0750.403
1.5000.0830.443
1.5000.0950.503
1.5000.1000.489
1.5000.1250.654
1.5000.1400.718
1.5000.2501.178
1.6250.0580.344
1.6250.0850.493
1.6250.1000.344
1.6250.1100.629
1.6250.1150.655
1.6250.4001.847
1.6600.1400.802
1.7500.0890.557
1.7500.2051.194
1.8120.1000.646
1.8750.0900.606
1.9000.1400.929
1.9600.1250.864
2.0000.0650.475
2.0000.0850.614
2.0000.1000.716
2.0000.1250.884
2.0160.1280.912
2.0600.2001.403
2.1250.0800.617
2.1250.0850.659
2.2500.1471.165
2.2500.2351.786
2.3750.0800.692
2.3750.0850.733
2.3750.1000.858
2.5000.2001.734
2.5000.2502.120
3.0000.1001.093
3.0000.2502.592
3.1250.1882.082
3.3750.0650.811
3.5000.0650.841
3.5000.1251.590
3.5000.2503.062
3.7500.1502.036
4.1250.0650.995

Standard Tolerances for Extruded Tube

Per ANSI H35.2 and Aluminum Standards and Data, in inches, for alloys other than 5083, 5086 and 5454.

Diameter (plus and minus)

Specified ODMean DiameterDiameter at Any Point
0.500 to 0.9990.0100.020
1.000 to 1.9990.0120.025
2.000 to 3.9990.0150.030
4.000 to 5.9990.0250.050

Wall and Straightness

ParameterTolerance
Wall eccentricity (wall up to 2.000″)±10% of mean wall, minimum ±0.010″, maximum ±0.060″
Straightness (OD 0.500″ to 5.999″)0.019″ x length in feet, all tempers except O and TX510

Length (plus only)

Specified ODUp to 12 ftOver 12 to 30 ftOver 30 to 50 ft
0.500 to 2.999+1/8+1/4+3/8
3.000 to 7.999+3/16+5/16+7/16

Mean wall tolerance depends on wall thickness and circumscribing circle size. The full tables are in the PDF below. Tighter OD, thinner wall or better straightness calls for cold drawn tube. Schedule pipe tolerances are on our Schedule Pipe Standard Tolerances page.

Download Production Capabilities PDF  |  Download Extruded Round Tube Standards PDF  |  Download Extruded Tube Tolerances PDF

Questions about extruded aluminum tube?

Porthole or Seamless Extruded Tube?

Alfiniti extrudes both. Pressure, criticality and cost decide which one fits.

Porthole Extrusion

Metal flows around a mandrel held in place by webs, then rejoins in a second die, leaving a longitudinal weld seam that is somewhat weaker than the base metal. Porthole is the lowest cost option, offers the widest alloy selection, holds wall thickness tighter than seamless, and can extrude features into the hollow.

Seamless Extrusion

A mandrel pierces the billet, so the tube leaves the die with no seam. The process runs slower and generates more scrap, so it costs more, and alloy selection is narrower.

Which One to Specify

Specify seamless for internal pressure or life critical applications. When neither applies and cost comes first, specify porthole.

Extruded Tube, Not Architectural Profiles

Window and door frames, enclosures, chassis, mounting brackets and frame corners are common aluminum extrusions. Alfiniti doesn’t make window and door frames, and those other profile shapes fall outside our usual work. Our extrusions are round tube and pipe, porthole or seamless, for parts like telescoping tubes, canoe and kayak paddles, snow shovel handles and railing.

Porthole extrusion animation
Seamless extrusion animation
Questions about porthole or seamless tube?

Industries Alfiniti Supplies

Alfiniti supplies extrusion and drawn tube to manufacturers in these industries:

  • Industrie automobile
  • Construction
  • Défense
  • Electrical transmission and distribution
  • HVAC
  • Marine
  • Équipement médicale
  • Sporting goods and recreation
  • Lawn and garden
  • Exposition

See applications by market on our Industries desservies page.

Related reading: Nouvelles applications d'extrusion dans les véhicules commerciaux et la Les EPD pour l’extrusion d’aluminium et la poussée en faveur de la décarbonisation.

Questions about extruded tube for your application?

Extruded Aluminum Tube FAQs

Common questions from engineers and sourcing teams specifying extruded aluminum tube.

What alloys do you extrude?

1050, 1060, 1100, 3003, 6005, 6061, 6063, 6082 and 6463, in O and T tempers. Other alloys and custom alloy and temper combinations are available on inquiry.

What is the minimum wall thickness for extruded tube?

0.050″ in 1050, 1060, 1100, 3003, 6063 and 6463, and 0.065″ in 6005, 6061 and 6082. Minimum wall depends on OD, and thinner walls may be possible on inquiry. For walls down to 0.027″, specify cold drawn tube.

What sizes can you extrude?

Our press handles circle sizes up to 6.00″, weights from 0.085 to 4.75 lb/ft and lengths up to 33 ft. Our standards list includes 80 round sizes from 0.250″ to 4.125″ OD.

What tolerances apply to extruded aluminum tube?

Standard tolerances follow ANSI H35.2 and Aluminum Standards and Data. For example, mean OD tolerance on 1.000″ to 1.999″ tube is ±0.012″ in most alloys, and straightness is 0.019″ per foot of length. Full tables are in our Standard Tolerances PDF.

Should I specify porthole or seamless extruded tube?

Seamless for internal pressure or life critical parts. Porthole when neither applies and cost matters most: it is the lowest cost option, comes in the widest range of alloys and holds wall thickness tighter than seamless.

When should I choose cold drawn tube instead of extruded?

When you need tighter tolerances, thinner walls, higher strength or a better surface finish, or when the part goes through automated processing, machining or significant bending. Extruded tube costs less because it skips the drawing step.

Do you also make welded aluminum tube?

Yes. Alfiniti makes extruded, welded and drawn tube. Welded tube is priced between extruded and drawn, with significantly better tolerances than extruded tube. See Tube soudé en Aluminium.

Do you extrude custom profiles like window frames?

No. Alfiniti doesn’t make window and door frames, and profiles like enclosures, chassis, mounting brackets and frame corners fall outside our usual work. Our extrusions are round tube and pipe, porthole or seamless.

Which ASTM specifications do you extrude to?

ASTM B221 for profiles, B308 for structural profiles, B317 for electrical, B429 for structural pipe and tube, and B241 for seamless tube and pipe.

Can you cut, machine and finish extruded tube?

Yes. We cut 0.375″ to 33 ft at up to ±0.005″, form up to 5.000″ OD, machine on conventional and CNC equipment, MIG and TIG weld, and finish with anodizing, painting or powder coating.

Do you supply extruded aluminum schedule pipe?

Yes. See Aluminum Pipe Schedules for sizes and Schedule Pipe Standard Tolerances for tolerances.

What compliance documents can you provide?

A USMCA certificate of origin, plus RoHS, REACH, Prop 65 and conflict minerals statements, all on our Tech/Rég page.